[通訊工程學系] 其他教師著作 |
2012 |
應用無線射頻識別標籤技術之熱氣泡式角加速儀及其製備方法 |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 其他教師著作 |
2011 |
Wireless Thermal Bubble Type Accelerometer and Monitor System Design |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 其他教師著作 |
2011 |
應用無線射頻識別標籤技術之熱氣泡式加速儀及其製備方法 |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 其他教師著作 |
2010 |
Intelligent Control of a SPM System Design with Parameter Variations |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2012 |
Ziegler-Nichols Based Intelligent Controller Design of a SPM System |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2012 |
WIRELESS THERMAL BUBBLE ACCELEROMETER ON A FLEXIBLE SUBSTRATE |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2012 |
Geometrical Positioning Schemes for MS Location Estimation |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2012 |
A Novel Neural-Fuzzy Guidance Law Design by Applying Different Neural Network Optimization Algorithms Successively for Each Step |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2011 |
Bio-Sensing and Monitor System Design by Integrating Replaceable Micro Array Probes and Amplifier with an Wireless Active RFID Tag |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2011 |
RFID-Based Thermal Bubble Non-Floating Type Accelerometer with Semi-Cylindrical Chamber and Filled with Xenon Gas |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2011 |
Smart Flexible Substrate-BASED Accelerometer Using Semi-cylindrical Chamber and Filled with Xenon Gas |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2011 |
奈米TiO2 於可撓式ITO基板製作的葉綠素染料敏化太陽能電池之製程探討 |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2011 |
Intelligent PD-Type Fuzzy Controller Design for Mobile Satellite Antenna Tracking System with Parameter Variations Effect |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2011 |
Intelligent Fuzzy Ziegler-Nichols-Based Controller Design of a SPM System with Parameters Variation |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2011 |
A Novel Remote Health Monitor with Replaceable Non-Fragile Bio-Probes on RFID Tag |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2011 |
High Altitude Air Defense with Intelligent Fuzzy Terminal Guidance Law by Taking Turning Rate and Radome Error Slope into Consideration |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2011 |
Noble Object Movement & Positioning Design by Wireless Sensor Network 無線網路之環境感知與安全監控系統設計-改進型貴重物品移動及定位偵測 |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2011 |
Ziegler-Nichols Based Intelligent Controller Design of a SPM System to Reduce the Hysteresis Effect of Force Actuator |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2011 |
Ziegler-Nichols-Based Intelligent Fuzzy PID Controller Design for Antenna Tracking System |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2011 |
Intelligent Fuzzy Terminal Guidance Law for High Altitude Air Defense by Taking Turning Rate and Radome Error Slope into Consideration |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2011 |
A Novel Low Temperature Method to Make a Wireless Accelerometer |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2011 |
Ziegler-Nichols Based Intelligent Fuzzy PID Controller Design of a SPM System with Parameters Variation |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2010 |
Intelligent Scanning Probe Microscope System Design |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2010 |
Applying both Traditional and Fuzzy Methods for Mobile Satellite Antenna Control System Design with Tracking Loop Gain Parameter Variations |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2010 |
Intelligent Control of a SPM System Design with Parameter Variations |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2010 |
Detection of Noble Object Movement by Wireless Sensor Network 無線網路之環境感知與安全監控系統設計-貴重物品移動偵測 |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2010 |
Intelligent Navigation and Voice Control System Design |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2010 |
PECVD Silicon Intrinsic Layer Deposition on Glass Substrate for Solar Cell Design |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2010 |
Wireless Thermal Bubble Type Accelerometer for Sport Science Monitor System Design |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2010 |
Bio-Sensing and Monitor System Design with Micro Array Probes on an Active RFID Tag |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2010 |
Wireless RFID-Based Thermal Bubble Type Accelerometer and Monitor System Design |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2010 |
PID Controller Based Intelligent Fuzzy Control of a SPM System Design |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2010 |
Integration Both PI and PD type Fuzzy Controllers for a Scanning Probe Microscope System Design |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2009 |
Reducing Hysteresis Effect of Force Actuator in a Scanning Probe Microscope |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2009 |
移動衛星天線追蹤迴路增益有參數變化時之智慧型控器設計 |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2009 |
透過曝光機一致性(SMM)自動即時回饋系統改善曝光機之堆疊誤差 |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2009 |
Bio-Sensing and Monitor System Design with Micro Array Probes and Amplifier on an Active RFID Tag |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2009 |
天然色素粉末染料敏化太陽能電池於塑膠軟板上之製作與特性分析 |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 研討會論文 |
2009 |
Intelligent Scanning Probe Microscope System Design |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 專利 |
2013 |
應用無線射頻識別標籤技術的熱氣泡式加速儀及製備方法 |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 專利 |
2012 |
應用無線射頻識別標籤技術的熱氣泡式角加速儀 |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 專利 |
2012 |
RFID BASED THERMAL BUBBLE TYPE ACCELEROMETER AND METHOD OF MANUFACTURING THE SAME |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 專利 |
2012 |
Thermal Bubble Type Angular Accelerometer |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 專利 |
2011 |
Microarray bioprobe device integrated with an amplifier having bottom-gate thin film transistors |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 專利 |
2010 |
整合有底閘極薄膜電晶體放大器之微陣列生物探針元件 |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 專利 |
2010 |
Microarray Bioprobe Device Integrated with a Semiconductor Amplifier Module on a Flexible Substrate |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 專題研究計畫 |
2012 |
以主動式RFID無線通訊及卡門濾波器技術,將加速儀、電子羅盤、氣壓式高度計,建築立體圖資訊等進行整合,提昇定位追蹤性能之家庭式遠端健康照顧監控系統 |
林君明 |
|
[通訊工程學系] 專題研究計畫 |
2010 |
掃描探針儀音圈力致動器有參數變化及磁滯效應時之智慧型設計研究 |
林君明 |
|
[通訊工程學系] 期刊論文 |
2013 |
RFID-Based Wireless Thermal Convection Angular Accelerometer by Using Semi-Spherical Chamber and Xenon Gas |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2013 |
Novel Uplink Initial Ranging Method for IEEE 802.16e OFDMA Systems |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2013 |
Hybrid TDOA/AOA Geometrical Positioning Schemes for MS Location Estimation |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2013 |
A More Reliable and Easy Manufacturing Wireless Thermal Convection Angular Accelerometer without any Movable Parts and Grooved Cavity |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2012 |
Intelligent Ziegler-Nichols-Based Fuzzy Controller Design for Mobile Satellite Antenna Tracking System with Parameter Variations Effect(101.07) |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2012 |
Geometrical positioning schemes based on hybrid lines of position |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2012 |
Intelligent Fuzzy Ziegler-Nichols-Based Controller Design of a SPM System with Parameters Variation |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2012 |
MS Location Estimation with Genetic Algorithm |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2012 |
Wireless Thermal Convection Accelerometer on a Flexible Substrate |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2012 |
Initial Mobile Station Location Selection for Taylor-Series Algorithm |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2012 |
Wireless Non-Floating Type Thermal Bubble Accelerometer with Semi-Cylindrical Chamber(101.01) |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2012 |
An Innovated Wireless RFID-Based Non-Floating Type Thermal Bubble Accelerometer on a Flexible Substrate |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2012 |
RFID-based Thermal Bubble Non-floating Type Accelerometer with Semi-cylindrical Chamber and Filled with Xenon Gas(100) |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2011 |
Wireless RFID-Based Thermal Bubble Type Accelerometer and Monitor System Design |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2011 |
A Novel Low Temperature Method to Make a Wireless Accelerometer |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2011 |
INTELLIGENT FUZZY PID CONTROLLER DESIGN OF A SCANNING PROBE MICROSCOPE SYSTEM |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2011 |
Ziegler-Nichols Based Intelligent Fuzzy PID Controller Design of a SPM System with Parameters Variation |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2011 |
Applying Rprop Neural Network for the Prediction of the Mobile Station Location |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2011 |
Dilution of Position Calculation for MS Location Improvement in Wireless Communication Systems |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2010 |
Model Building and Simulation of Thermoelectric Module Using MATLAB/SIMULINK |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2010 |
Integration both PI and PD Type Fuzzy Controllers for a Scanning Probe Microscope System Design |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2010 |
PI-Type Fuzzy Controllers for Mobile Satellite Antenna Control System Design with Tracking Loop Gain Parameter Variations |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2010 |
Optimal Control of Fuel Processing System Using Generalized Linear Quadratic Gaussian and Loop Transfer Recovery Method |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2010 |
Ziegler-Nichols PID Controller Based Intelligent Fuzzy Control of a SPM System Design |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2010 |
Eliminating Hysteresis Effect of Force Actuator in a SPM |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2009 |
INTEGRATING MICROARRAY PROBES AND AMPLIFIER ON AN ACTIVE RFID TAG FOR BIOSENSING AND MONITOR SYSTEM DESIGN |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2009 |
Integrating MEMS Electro-Static Driven Micro-Probe and Laser Doppler Vibrometer for Non-Contact Vibration Mode SPM System Design |
林君明; Lin, Jium-Ming |
|
[通訊工程學系] 期刊論文 |
2009 |
Intelligent Fuzzy Control of a Scanning Probe Microscope System Design |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2009 |
Eliminating Hysteresis Effect of Force Actuator in a SPM |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2009 |
Improve Scanner Matching Using Automated Real-time Feedback Control via Scanner Match Maker (SMM) |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2009 |
電子標籤天線與探針卡結構分析設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2009 |
種魚晶片監測管理系統 LF 讀取器天線與場強測試分析 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
AZO與ITO應用於染料敏化太陽能電池製作製程與特性分析 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
驗測無線電子標籤天線與封條之設備整合開發研究 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
Eliminating Hysteresis Effect of Force Actuator for Profiler Design with Rate Inner Loop Compensation |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
Integrating Micro Array Bio-Sensing Probes with Semiconductor Amplifier on a Flexible Substrate |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
Non-Contact Mode SPM System Design with MEMS Micro-Cantilever Probe |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
Embedded Intelligent Car Navigation and Voice Control System Design |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
Electrostatic Driven Micro-cantilever Probe Design |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
Wafer Level Test Vertical Probe Design |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
Intelligent Scanning Probe Microscope System Design |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
Integrating Micro Array Probes with Amplifier on Flexible Substrate |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
可撓式基板上整合微陣列生物探針及薄膜電晶體放大器設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
二氧化鈦薄膜應用於塑膠軟板上之染料敏化太陽能電池製程研究 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
Optimal Control of Fuel Processing System Using Generalized Linear Quadratic Gaussian and Loop Transfer Recovery Method |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
Scanning Probe Microscope System Design with Fuzzy Control |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
全彩發光二極體模組之分光曲線量測系統研製 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
Glass Substrate-Based Laser Anneal Amorphous Silicon Solar Cell Design |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
Scanning Probe Microscope System Design with Linear Velocity Transducer for Feedback Compensation |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
Opto-Mechatronics Integration for Metrology |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
Embedded Vehicle Positioning System Design |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
Micro Array Bio-Probes Design with Amplifier on a Flexible Substrate |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
矽薄膜太陽能電池電漿輔助化學氣相沉積本質層與透明導電膜於玻璃基板研究 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
衛星行動通信接收天線智慧型追蹤及穩定控制系統設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
Integrating Traditional and Fuzzy Controllers for Mobile Satellite Antenna Tracking System Design |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
A Module by Integrating Micro Array Bio- Probes with Semiconductor Amplifier on a Flexible Substrate |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2008 |
Intelligent Mobile Satellite Antenna Tracking System Design |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2007 |
Eliminating Hysteresis Effect of Force Actuator for Profiler Design with Rate Inner Loop Compensation |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2007 |
全彩發光二極體模組之分光曲線量測系統研製 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2007 |
可撓式基板上整合薄膜電晶體放大器及微陣列生物探針設計 Microarray Bioprobe Device Integrated with a Semiconductor Amplifier Module on a Flexible Substrate |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2007 |
Vertical-Type Wafer Level Probe Card Study |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2007 |
Electrostatic Microprobe Non-Contact Mode SPM System Design |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2007 |
玻璃基板上非晶矽薄膜太陽能電池雷射退火與離子植入低溫製程設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2007 |
行動通信天線衛星追蹤控制系統設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2007 |
Optimal Control Design of Fuel Processing System by Linear Quadratic Gaussian and Loop Transfer Recovery Method |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2007 |
消除馬達靜摩擦效應之行動通信天線衛星追蹤模糊控制系統設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2007 |
INTEGRATING MICROARRAY BIOPROBE WITH SEMICONDUCTOR AMPLIFIER ON A FLEXIBLE SUBSTRATE |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2007 |
Nanometer Measurement with Interpolation Electronics |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2007 |
Scanning Probe Microscope System Design with Linear Velocity Transducer for Feedback Compensation |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2007 |
Profiler Design with Multi-Sensor Data Fusion Methods |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2007 |
Opto-Mechatronics Integration for Metrology |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2007 |
Eliminating Hysteresis Effect of Force Actuator for Profiler Design with Rate Inner Loop Compensation |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2006 |
電子標籤天線與探針結構分析設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2006 |
Non-Contact Mode SPM System Design by Integrating MEMS Electro-static Micro-probe and Laser Doppler Interferometer |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2006 |
晶圓級垂直式積體電路探針卡之微機電製程設計分析 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2006 |
General Autopilot Design for BTT Missile by Generalized Linear Quadratic Gaussian / Loop Transfer Recovery Method |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2006 |
Integrated Smart Car Navigation and Voice Control System Design |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2006 |
Ka 頻段艦載行動衛星通信之追蹤控制系統設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2006 |
Microprobe and Non-contact Mode SPM System Design |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2006 |
整合有底閘極薄膜電晶體放大器之微陣列生物探針元件 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2006 |
Microarray Bioprobe Device Integrated with a Semiconductor Amplifier Module on a Flexible Substrate |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2006 |
TiO2奈米多孔性薄膜於染料敏化太陽能電池(DSSC)在塑膠軟板上製程應用 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2005 |
Contact Force-Controlled Surface Profiler Design with Kalman Filtering and Multi-Sensor Data Fusion Methods |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2005 |
RFID電子標籤垂直探針卡 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2005 |
MEMS 8-bits digital-to analog converter design |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2005 |
ARINC 429 航電儀表通訊介面功能測試與評估系統平台設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2005 |
Integrated Car Voice Control and Navigation System Design |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2005 |
Experiment Design on Smart MEMS Sensor Module |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2005 |
MEMS pressure sensor tester design |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2005 |
Contact Force-Controlled Surface Profiler Design with Kalman FIL Tering and Multi-Sensor Data Fusion Methods |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2005 |
Wireless Smart Pressure Sensor Module Design |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2005 |
簡易型GPS/DR/GIS整合之載具平面導航系統設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2005 |
Vehicle Navigation System for INS Integrated with GPS |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2005 |
以DSP為平台之GPS/DR/GIS與聲控整合式平面導航系統設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2005 |
Thermometer Code Current Mode 8-bits Digital-to-Analog Converter Design |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2005 |
Vehicle Navigation and Communication System Design for Maimed Persons by Integrating GPS/INS/GIS/GSM and Voice Modules |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2005 |
Surface Profiler Design with Multi-Sensor Data Fusion Methods |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2005 |
MEMS 8-Bits DAC Design |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2005 |
以DSP為平台之GPS/DR/GIS與聲控整合式載具平面導航系統設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2004 |
簡易型GPS/DR/GIS整合之載具平面導航系統設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2004 |
都卜勒頻移法定位系統研究 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2004 |
以嵌入式DSP為平台之GPS/INS導航整合系統設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2004 |
Structure Uncertainty Description of Non-Minimum Phase Systems in LQG/LTR Procedure |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2004 |
微機電壓力計測試器設計教學與研製 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2004 |
無線智慧型壓力與溫度感測模組教學與研製 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2004 |
Teaching and Design on Integrating Interpolation Electronics for Nanometer Measurement and Positioning |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2004 |
MEMS Accelerometer Thermo-Mechanical Analysis and Design |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2004 |
ARINC 429航電儀表通訊介面功能測試與評估系統平台設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2004 |
Teaching and Design on Smart MEMS Pressure Sensor Module |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2004 |
Unification of Eigen-Structure Assignment and Linear Exponential Quadratic Gaussian/Loop Transfer Recovery Methods |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2004 |
可控制接觸力之掃描探針顯微系統教學與研製 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2004 |
簡易型GPS/DR/GIS整合之載具平面導航系統設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2003 |
接觸式掃描探針顯微系統教學與研究 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2003 |
三次差分全球定位系統基地台之設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2003 |
微航電慣性感測系統與全球定位系統整合設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2003 |
微機電壓力計量測電路之教學與研究 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 研討會論文 |
2003 |
GPS/DR導航系統整合設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 專利 |
2007 |
整合有半導體放大器之微陣列生物探針元件 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 專利 |
2005 |
垂直式彈性探針及附壓力感測器之晶圓級垂直式針測卡 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 專題研究計畫 |
2008 |
整合類神經網路及動態滑順模糊控制之可調接觸力垂直探針輪廓儀設計 |
林君明 |
|
[機械工程學系] 專題研究計畫 |
2007 |
具有內迴路阻尼調整之可控制接觸力掃描探針顯微系統設計(II) |
林君明 |
|
[機械工程學系] 專題研究計畫 |
2006 |
Ka頻段艦載行動衛星通信之追蹤控制系統設計研析 |
林君明 |
|
[機械工程學系] 專題研究計畫 |
2006 |
具有內迴路阻尼調整之可控制接觸力掃描探針顯微系統設計(I) |
林君明 |
|
[機械工程學系] 專題研究計畫 |
2005 |
智慧型聲控汽車導航與通訊系統整合研究(2/2) |
林君明 |
|
[機械工程學系] 專題研究計畫 |
2004 |
決策支援系統之研究 |
林君明 |
|
[機械工程學系] 專題研究計畫 |
2003 |
標準智慧型微航電慣性感測模組研製 |
林君明 |
|
[機械工程學系] 專題研究計畫 |
2003 |
都 卜 勒 頻 移 法 定 位 系 統 研 究 |
林君明 |
|
[機械工程學系] 專題研究計畫 |
2002 |
微航電慣性感測系統與全球定位系統整合設計(2/2) |
林君明 |
|
[機械工程學系] 專題研究計畫 |
2002 |
微機電製程技術:微加速度計的設計、分析與模擬(III) |
林君明 |
|
[機械工程學系] 專題研究計畫 |
2001 |
微航電慣性感測系統與全球定位系統整合設計(1/2) |
林君明 |
|
[機械工程學系] 專題研究計畫 |
2000 |
懸樑式探針顯微系統設計 (II) |
林君明 |
|
[機械工程學系] 專題研究計畫 |
1999 |
懸樑式探針顯微系統設計 |
林君明 |
|
[機械工程學系] 期刊論文 |
2009 |
Scanning Probe Microscope System Design with Linear Velocity Transducer for Feedback Compensation |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 期刊論文 |
2009 |
Applying Intelligent Fuzzy Control to Reduce Hysteresis Effect of Force Actuator in a SPM |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 期刊論文 |
2008 |
Intelligent Mobile Satellite Antenna Tracking System Design |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 期刊論文 |
2008 |
Mobile Satellite Antenna Tracking System Design with Intelligent Controller |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 期刊論文 |
2008 |
Contact Force-Controlled SPM System Design with Fuzzy Controller |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 期刊論文 |
2007 |
Wafer Level MEMS Vertical Probe Card Design |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 期刊論文 |
2007 |
Contact Type Surface Profiler Design with Multi-Sensor Data Fusion Methods |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 期刊論文 |
2007 |
A Study of Fabricating Micro Array Bio-Probe Device on A Flexible Substrate |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 期刊論文 |
2007 |
Smart Vehicle INS and Voice Guided System Study |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 期刊論文 |
2006 |
Non-contact Mode SPM System Design with MEMS Microprobe |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 期刊論文 |
2005 |
以DSP為平台之GPS/DR/GIS與聲控整合式載具平面導航系統設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 期刊論文 |
2005 |
整合載波相位三差及泰勒多項式近似法之定位系統研究 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 期刊論文 |
2005 |
IEEE 1451 智慧型感測器模組設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 期刊論文 |
2005 |
MEMS 8-Bits DAC Design |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 期刊論文 |
2005 |
Surface Profiler Design with Multi-Sensor Data Fusion Methods |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 期刊論文 |
2004 |
General Optional Control System Design by Structured Uncertainty Description and EigenStructure Assignment Method |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 期刊論文 |
2004 |
微航電慣性感測系統與全球定位系統整合設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 期刊論文 |
2004 |
ARINC 429航空儀表通訊介面功能測試與評估系統平台設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 期刊論文 |
2004 |
Optional Satellite Attitude Control System Design by Combination of EigenStructure Assignment and LEQG/LTR Methods |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 期刊論文 |
2004 |
微機電壓力計量測電路之設計 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 期刊論文 |
2004 |
全球定位機收機都卜勒頻移之載具定位法研究 |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 期刊論文 |
2004 |
Optimal Satellite Attitude Control System Design by Combination of Eigen-structure Assignment and LEQG/LTR Methods |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 期刊論文 |
2003 |
Surface Profiler Design with Kalman Filtering and Multi-Sensor Data Fusion Methods |
林君明; Lin, Jium-Ming |
|
[機械工程學系] 期刊論文 |
2003 |
單晶片微機電加速儀熱殘留應力及犧牲層濕式蝕刻之形變應力分析 |
林君明; Lin, Jium-Ming |
|
[機械與航太工程研究所] 專題研究計畫 |
2000 |
都卜勒頻移法定位及導航系統研究 (II) |
林君明 |
|
[機械與航太工程研究所] 專題研究計畫 |
1999 |
都卜勒頻移法定位及導航系統研究 |
林君明 |
|
[機械與航太工程研究所] 專題研究計畫 |
1998 |
三次差分式全球定位系統基地台之設計 |
林君明 |
|
[機械與航太工程研究所] 專題研究計畫 |
1997 |
航空導控電子實體迴路模擬系統研製 |
林君明 |
|
[機械與航太工程研究所] 專題研究計畫 |
1996 |
交談式智慧型系統於遙控載具之應用--全球定位系統與慣性導航系統複合法研究 |
林君明 |
|
[機械與航太工程研究所] 專題研究計畫 |
1995 |
以節約能量消耗及容忍參數變化為主要考量之衛星姿態控制法研究 |
林君明 |
|
[機械與航太工程研究所] 專題研究計畫 |
1995 |
全球衛星定位系統飛行載具定位之快速解算法則研究 |
林君明 |
|
[機械與航太工程研究所] 專題研究計畫 |
1994 |
以線性指數二次高斯法為主之飛行載具操控系統解交連特徵系統架構研究 |
林君明 |
|