資料載入中.....
|
|
正在載入社群分類, 請稍候....
|
| |
| 2013 [9] | | 2012 [6] | | 2011 [6] | | 2010 [17] | | 2009 [18] | | 2008 [12] | | 2007 [3] | | 2006 [5] | | 2005 [3] | | 2004 [2] | | 2003 [2] |
|
"Wu, Horng-yu"的相關文件
回到依作者瀏覽
顯示 83 項.
|
類別 |
日期 |
題名 |
作者 |
檔案 |
| [機械工程學系] 期刊論文 |
2013 |
Constitutive Analysis of Ni-Base Superalloy Hastelloy X under Hot
Compression Based on Thermodynamics |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2013 |
Constitutive and Processing Map Analyses of Stainless Steel 316 under
Hot Compression |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2013 |
Flow Behavior and Microstructural Evolution of 316 Stainless Steel
under Hot Compression |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2006 |
Study of Deformation Characteristics of a Superplastic 5083 Al Alloy during Bi-axial Deformation with Lubrication |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2005 |
超輕鎂鋰合金性質之研究 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2005 |
Analysis of Damaged Turbine Blades of Power Generator |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2003 |
8090超塑性鋁合金多軸應力狀態之金屬流特性分析 |
吳泓瑜; Wu, Horng-yu |
 |
| [機械工程學系] 研討會論文 |
2008 |
Aging behavior of Mg–Li–Al–Zn alloy with Scandium addition |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2008 |
Al-Sc合金在3.5％NaCl溶液下不同PH值之腐蝕性質研究 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2010 |
AZ31B-H24在不同溫度條件下等軸應變之成形性分析 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2009 |
AZ31B-H24薄板片之不同滾軋方向於高溫機械性質分析 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2009 |
AZ31B-H24鎂合金薄板材拉伸特性之研究 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2009 |
AZ31B-O鎂合金薄板單軸向拉伸之流變性質研究 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2008 |
AZ31B-O鎂合金薄板機械性質與成形性之研究 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2009 |
AZ31B薄板片於多軸應變之超塑性變形與成形性分析 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2009 |
AZ31鎂合金在不同溫度下滾軋方向對機械性質的影響 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2011 |
Compressive Flow Behavior of AZ61 Mg Alloy at Elevated Temperatures |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2008 |
LZ60薄板片高溫下之機械性質和成形性 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2008 |
LZ90鎂合金之成形性及變形行為 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2006 |
LZ91鎂鋰合金之拉伸性質 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2007 |
Mg-9%Li-1%Zn合金薄板之機械性質與成形性 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2007 |
Microstructural Characterization and Mechanical Behavior of an Mg-9%Li-1%Zn Alloy |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2008 |
Microstructures and mechanical properties of an Mg–Li–Al–Zn alloy with minor Sc addition |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2010 |
Deformation characteristics of fine-grained magnesium alloy AZ31B thin sheet during rapid gas blow forming |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2013 |
Strain-dependent constitutive analysis of extruded AZ61 Mg alloy under hot compression |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2011 |
Compressive flow behavior of AZ61 Mg alloy at elevated temperatures |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2010 |
Tensile flow and strain-hardening behaviors of dual-phase Mg-Li-Zn alloy thin sheets |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2010 |
Effect of pressurization profile on the deformation characteristics of fine-grained AZ31B Mg alloy sheet during gas blow forming |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2010 |
Mechanical properties and strain-hardening behavior of Mg alloy AZ31B-H24 thin sheet |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2011 |
Anisotropic and tensile flow behaviors of Mg alloy AZ31B thin sheet in H24 condition at elevated temperatures |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2010 |
Strain-Hardening Behavior of Mg-Li-Zn Alloy Thin Sheets under Tension |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2012 |
Rate and Orientation Dependence of Formability in Fine-Grained AZ31B-O Mg Alloy Thin Sheet |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2012 |
Hot deformation characteristics and strain-dependent constitutive analysis of Inconel 600 superalloy |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2012 |
Hot deformation characteristics of as-cast and homogenized AZ61 Mg alloys under compression |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2013 |
Hot compressive flow stress modeling of homogenized AZ61 Mg alloy using strain-dependent constitutive equations |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2013 |
Processing Map for Hot Deformation of Homogenized AZ61 Mg Alloy |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2010 |
Tensile flow behavior of fine-grained AZ31B magnesium alloy thin sheet at elevated temperatures |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2009 |
Cavitation behavior in superplastic 5083 Al alloy during multiaxial gas blow forming with lubrication |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2012 |
Dynamic behavior of extruded AZ61 Mg alloy during hot compression |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2006 |
Effect of Lubrication on Deformation Characteristics of A Superplastic 5083 Al Alloy during Bi-axial Deformation |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2009 |
Effect of heat treatment on the microstructure and mechanical properties of the consolidated Mg alloy AZ91D machined chips |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2009 |
Effects of minor Scandium addition on the properties of Mg-Li-Al-Zn alloy |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2004 |
Effect of multiaxial stress on deformation characteristics of 8090 superplastic aluminum alloy |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2005 |
Influence of Extrusion Variables on Bonding Effect of Hollow Shaped 6463 Aluminum Alloy |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2006 |
Microstructural Characterization of a Mg-9%Li-1%Zn Alloy |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2006 |
Cavitation characteristics of a superplastic 5083 Al alloy during gas blow forming |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2007 |
Effect of die surface roughness on deformation characteristics and cavitation during blow forming in a superplastic 5083 alloy |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2009 |
Deformation characteristics and cavitation during multiaxial blow forming in superplastic 8090 alloy |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2008 |
Mechanical properties and formability of an Mg–6%Li–1%Zn alloy thin sheet at elevated temperatures |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2008 |
Deformation behaviour and formability of LZ90 Mg alloy |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2008 |
Microstructure and mechanical behavior of LZ91 Mg alloy processed by rolling and heat treatments |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2008 |
Mechanical and anisotropic behaviors of Mg–Li–Zn alloy thin sheets |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2009 |
Plastic anisotropy and strain-hardening behavior of Mg−6%Li−1%Zn alloy thin sheet at elevated temperatures |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2008 |
Deformation behavior in superplastic 5083 Al alloy during biaxial gas pressure forming with lubrication |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 期刊論文 |
2009 |
Effects of Age Heat Treatment and Thermomechanical Processing on Microstructure and Mechanical Behavior of LAZ1010 Mg Alloy |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2013 |
Processing Map for Hot Deformation of Homogenized AZ61 Mg Alloy |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2010 |
Flow Behavior of AZ31B-O Mg Alloy Sheet under Tension at Elevated Temperatures |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2010 |
Rapid Gas Blow Formability of Fine-Grained AZ31B Mg Alloy Sheet |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2010 |
Mechanical Properties and Strain-hardening Behaviors of a few Mg-Li-Zn Alloy Thin Sheets |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2010 |
Rapid Gas Blow Forming of Fine-Grained Magnesium Alloy AZ31B Thin Sheet |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2010 |
Effect of Loading Orientation and Deformation rate on the Formability of AZ31B Mg Alloy Thin Sheet |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2010 |
Deformation Characteristics of AZ31B-O Mg Alloy Sheet during Rapid Gas Blow Forming |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2011 |
Tensile flow behavior in Inconel 600 alloy sheet at elevated temperatures |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2011 |
Hot Compressive Flow Behavior of Inconel 600 Superalloy |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2012 |
Constitutive Analysis of Ni-Base Superalloy Hastelloy X under Hot Compression Based on Thermodynamics |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2013 |
Flow Behavior and Microstructural Evolution of 316 Stainless Steel under Hot Compression |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2011 |
Tensile properties and shallow pan rapid gas blow forming of commercial fine-grained Mg alloy AZ31B thin sheet |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2009 |
Deformation characteristics of fine-grained magnesium alloy AZ31B thin sheet during fast gas blow forming |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2010 |
Strain-Hardening Behavior of Mg-Li-Zn Alloy Thin sheets under Tension |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2009 |
不同鍍鋅鋼板於3%NaCl酸性溶液中腐蝕性質研究 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2009 |
加壓程序對鎂合金AZ31B-O薄板之成形特性分析 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2003 |
平面應變對5083超塑性鋁合金變形特性之影響 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2004 |
潤滑劑對5083超塑性鋁合金成形特性之影響 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2008 |
熱處理對鋁鈧合金在3.5％NaCl溶液中腐蝕性質之研究 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2010 |
鎂合金AZ31B-O於超塑性氣壓成形之顯微組織影響研究 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2009 |
鎂合金AZ31B-O薄板片在不同溫度下超塑性變形分析 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 其他教師著作 |
2009 |
鎂合金AZ31B-O薄板片在不同溫度下超塑性變形分析 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2009 |
鎂合金AZ31B薄板片之高溫環境下氣壓成形與應變分析 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2010 |
鎂合金快速氣壓成形之特性分析 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2009 |
鎂合金薄板片高溫機械性質與超塑成形特性研究 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2010 |
鎂板滾壓方向運用於超塑性之成形特性 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2013 |
鎳基超合金Hastalloy-X熱變形組合關係分析 |
吳泓瑜; Wu, Horng-yu |
|
| [機械工程學系] 研討會論文 |
2012 |
鎳基超合金Hastelloy X高溫變形特性及組合關係分析 |
吳泓瑜; Wu, Horng-yu |
|
|
