Taguchi Analysis of Milling Wear Automatic Monitoring System Based on Machine Vision Technique

Chung-Hua University Repository > 工學院 > 機械工程學系 > 研討會論文 > Item 987654321/34668

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://chur.chu.edu.tw/handle/987654321/34668

题名:	Taguchi Analysis of Milling Wear Automatic Monitoring System Based on Machine Vision Technique
作者:	邱奕契 Chiou, Yih-Chih
贡献者:	機械工程學系 Mechanical Engineering
关键词:	Machine Vision;Rhombus Micro-end-mill;Different Coating;Taguchi Method;Analysis of Variance Machine Vision;Rhombus Micro-end-mill;Different Coating;Taguchi Method;Analysis of Variance
日期:	2009
上传时间:	2014-06-27 02:59:31 (UTC+8)
摘要:	This study proposes a tool wear monitoring system based on machine vision technique. The tool wear of single edge rhombus micro-end-mills with mill parameters (Side Clearance Angle, different coating layer, feed rate and spindle speed) in milling 6061 alu This study proposes a tool wear monitoring system based on machine vision technique. The tool wear of single edge rhombus micro-end-mills with mill parameters (Side Clearance Angle, different coating layer, feed rate and spindle speed) in milling 6061 alu
显示于类别:	[機械工程學系] 研討會論文

文件中的档案:

档案	描述	大小	格式	浏览次数
s_M211_0226.pdf		27Kb	Adobe PDF	61	检视/开启

在CHUR中所有的数据项都受到原著作权保护.