English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 8557/14866 (58%)
造訪人次 : 1401722      線上人數 : 1790
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    主頁登入上傳說明關於CHUR管理 到手機版


    請使用永久網址來引用或連結此文件: http://chur.chu.edu.tw/handle/987654321/34637


    題名: Taguchi Method for Parametric Appraisal of Wear on Micro-end-milling Tools with Different Coating
    作者: 邱奕契
    Chiou, Yih-Chih
    貢獻者: 機械工程學系
    Mechanical Engineering
    關鍵詞: Dry milling;Taguchi method;micro-end-milling;tool wear;different coating
    Dry milling;Taguchi method;micro-end-milling;tool wear;different coating
    日期: 2008
    上傳時間: 2014-06-27 02:58:07 (UTC+8)
    摘要: Experimental milling of Al alloy was performed to compare single edge rhombus micro-end mills. The purpose was to examine how various control factors affect tool wear. Examined control factors included coating layer, side clearance angle, feed rate and sp
    Experimental milling of Al alloy was performed to compare single edge rhombus micro-end mills. The purpose was to examine how various control factors affect tool wear. Examined control factors included coating layer, side clearance angle, feed rate and sp
    顯示於類別:[機械工程學系] 研討會論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    s_M211_0216.pdf26KbAdobe PDF31檢視/開啟


    在CHUR中所有的資料項目都受到原著作權保護.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋