Taguchi Method Applied to Parametric Appraisal of Tool Wear of Different Coating Micro-End-Milling

Chung-Hua University Repository > 工學院 > 機械工程學系 > 研討會論文 > Item 987654321/34617

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://chur.chu.edu.tw/handle/987654321/34617

题名:	Taguchi Method Applied to Parametric Appraisal of Tool Wear of Different Coating Micro-End-Milling
作者:	邱奕契 Chiou, Yih-Chih
贡献者:	機械工程學系 Mechanical Engineering
关键词:	Dry milling;Taguchi method;Micro-end-milling;Tool wear;Different coating Dry milling;Taguchi method;Micro-end-milling;Tool wear;Different coating
日期:	2008
上传时间:	2014-06-27 02:57:26 (UTC+8)
摘要:	In this study, a series of dry milling experiments of Al-alloy using single edge rhombus micro-end-mills were performed. The purpose was to examine the influences of various control factors on tool wear. Examined control factors included coating layer, si In this study, a series of dry milling experiments of Al-alloy using single edge rhombus micro-end-mills were performed. The purpose was to examine the influences of various control factors on tool wear. Examined control factors included coating layer, si
显示于类别:	[機械工程學系] 研討會論文

文件中的档案:

档案	描述	大小	格式	浏览次数
s_M211_0211.pdf		26Kb	Adobe PDF	105	检视/开启

在CHUR中所有的数据项都受到原著作权保护.